思科認證網絡設計工程師CCDA認證考試要點

時間：2024-06-28 08:43:51 思科認證我要投稿

相關推薦

　　200-310 DESGN思科互聯網絡解決方案考試，考試時間為75分鐘，共有55-65道與思科CCDA®認證相關的考題。通過200-310 DESGN考試需要具備思科企業網絡架構網絡設計的基礎知識。獲得CCDA認證的專業人士能夠設計包括涉及為SMB或基礎企業園區及分支網絡提供LAN/WAN技術的可路由、可交換網絡架構及服務。

思科認證網絡設計工程師CCDA認證考試要點

　　1.0 Design Methodologies15%

　　1.1 Describe the Cisco Design lifecycle – PBM (plan, build, manage)

　　1.2 Describe the information required to characterize an existing network as part of the planning for a design change

　　1.3 Describe the use cases and benefits of network characterization tools (SNMP, NBAR, NetFlow)

　　1.4 Compare and contrast the top-down and bottom-up design approaches

　　2.0 Design Objectives20%

　　2.1 Describe the importance and application of modularity in a network

　　2.2 Describe the importance and application of hierarchy in a network

　　2.3 Describe the importance and application of scalability in a network

　　2.4 Describe the importance and application of resiliency in a network

　　2.5 Describe the importance and application of concept of fault domains in a network

　　3.0 Addressing and Routing Protocols in an Existing Network20%

　　3.1 Describe the concept of scalable addressing

　　3.1.a Hierarchy

　　3.1.b Summarization

　　3.1.c Efficiency

　　3.2 Design an effective IP addressing scheme

　　3.2.a Subnetting

　　3.2.b Summarization

　　3.2.c Scalability

　　3.2.d NAT

　　3.3 Identify routing protocol scalability considerations

　　3.3.a Number of peers

　　3.3.b Convergence requirements

　　3.3.c Summarization boundaries and techniques

　　3.3.d Number of routing entries

　　3.3.e Impact of routing table of performance

　　3.3.f Size of the flooding domain

　　3.3.g Topology

　　3.4 Design a routing protocol expansion

　　3.4.a IGP protocols (EIGRP, OSPF, ISIS)

　　3.4.b BGP (eBGP peering, iBGP peering

　　4.0 Enterprise Network Design20%

　　4.1 Design a basic campus

　　4.1.a Layer 2/Layer 3 demarcation

　　4.1.b Spanning tree

　　4.1.c Ether channels

　　4.1.d First Hop Redundancy Protocols (FHRP)

　　4.1.e Chassis virtualization

　　4.2 Design a basic enterprise network

　　4.2.a Layer 3 protocols and redistribution

　　4.2.b WAN connectivity

　　4.2.b(i) Topologies (hub and spoke, spoke to spoke, point to point, full/partial mesh)

　　4.2.b(ii) Connectivity methods (DMVPN, get VPN, MPLS Layer 3 VPN, Layer 2 VPN, static IPsec, GRE,VTI)

　　4.2.b(iii) Resiliency (SLAs, backup links, QoS)

　　4.2.c Connections to the data center

　　4.2.d Edge connectivity

　　4.2.d(i) Internet connectivity

　　4.2.d(ii) ACLs and firewall placements

　　4.2.d(iii) NAT placement

　　4.3 Design a basic branch network

　　4.3.a Redundancy

　　4.3.a(i) Connectivity

　　4.3.a(ii) Hardware

　　4.3.a(iii) Service provider

　　4.3.b Link capacity

　　4.3.b(i) Bandwidth

　　4.3.b(ii) Delay

　　5.0 Considerations for Expanding an Existing Network25%

　　5.1 Describe design considerations for wireless network architectures

　　5.1.a Physical and virtual controllers

　　5.1.b Centralized and decentralized designs

　　5.2 Identify integration considerations and requirements for controller-based wireless networks

　　5.2.a Traffic flows

　　5.2.b Bandwidth consumption

　　5.2.c AP and controller connectivity

　　5.2.d QoS

　　5.3 Describe security controls integration considerations

　　5.3.a Traffic filtering and inspection

　　5.3.b Firewall and IPS placement and functionality

　　5.4 Identify traffic flow implications as a result of security controls

　　5.4.a Client access methods

　　5.4.b Network access control

　　5.5 Identify high-level considerations for collaboration (voice, streaming video, interactive video) applications

　　5.5.a QoS (shaping vs. policing, trust boundaries, jitter, delay, loss)

　　5.5.b Capacity

　　5.5.c Convergence time

　　5.5.d Service placement

　　5.6 Describe the concepts of virtualization within a network design

　　5.7 Identify network elements that can be virtualized

　　5.7.a Physical elements (chassis, VSS, VDC, contexts)

　　5.7.b Logical elements (routing elements, tunneling, VRFs, VLANs)

　　5.8 Describe the concepts of network programmability within a network design

　　5.8.a APIs

　　5.8.b Controllers

　　5.8.c Application Centric Infrastructure (ACI)

　　5.9 Describe data center components

　　5.9.a Server load balancing basics

　　5.9.b Blocking vs. non-blocking Layer 2

　　5.9.c Layer 2 extension

【思科認證網絡設計工程師CCDA認證考試要點】相關文章：

思科網絡工程師認證考試09-03

思科認證網絡工程師CCNA安全認證考試大綱08-22

思科工程師認證考試09-13

思科網絡工程師認證考試方法07-22

思科認證CCNA認證考試簡介06-08